Hero3
Hero4
Hero5
Hero6
Hero7
Hero1
Hero2

Featured

Mike's TyreShield

Mike's TyreShield

Let's hear what some of our largest Retailers and Suppliers have to say!We have been using Mike..

$0 Ex Tax: $0

Premium Tyre Pressure Stabilizer & Puncture Protection



One key problem: Under inflation is a frequent cause of tyre damage, it also acts like a dragging-brake and significantly increases fuel consumption, makes for harder steering and decreases ride quality.

One easy answer: Our tyre Sealants will help to undo all the adverse effects of under inflation and improve the safety, reduce lost downtime and with no adverse effects, help to make your days run a lot smoother.

Mike's TyreShield, can be ordered in 1ltr, 2ltr, 2ltr & 1ltr & 5ltr (as applicator) 

 






How does it work?


Mike's TyreShield, is an innovative concentrated liquid compound easily installed through the tyre valve after the removal of the tyre valve system. After installation, simply drive the vehicle a few kilometers allowing the tyre rotation to distribute the product evenly throughout the inside of the tyre. Now, all porosity, bead, and rim leaks are sealed for the full legal life of the tyre





Once a tyre has been treated with Mike's TyreShield, the compound creates a thin liquid film on the inside of the treated tyre which provides a barrier that maintains tyre pressure and creates a complete air tight container within the tyre and tyre rim. Optimum tyre pressure is improved for the full legal life of the tyre, and results in better tyre performance, improved fuel use, and increased safety





Mike's TyreShield, makes use of road & tyre friction to seal punctures while the vehicle is in motion. In the event of a puncture, the pressurized air inside the tyre trying to escape will immediately draw Mike's TyreShield, to the source of the leak and seal the hole created by the puncture, regardless if the puncturing object is removed or not. The seal is permanent, the tyre does not need to be removed and repaired, and eliminates the need for the driver to make immediate stops to check the tyre. Should a puncturing object be removed while the vehicle is stationary the tyre may loose pressure until the vehicle is in motion. For best results drive/ride the vehicle 2-5 km to ensure the leak is effectively sealed. After installation, Mike's TyreShield, remains dormant inside the tyre until a puncture activates it.



Why It works!


Improving the performance of any pneumatic tyre.

Just about every pneumatic tyre can benefit from using Mike's TyreShield, Professional Tyre Sealants, Mike's TyreShield, simply improves the performance of your tyres, making them better, keeping you safer and saving you money!




Biscuit Wheels & Run Flat Tyres

Most modern vehicles are either fitted with run flat tyres or biscuit wheels in case of a flat tyre, some even offer roadside assist, but not many manufacturers offer any sort of puncture prevention. Should your vehicle be fitted with these emergency solutions you will quickly discover that they are just that, emergency solutions! You still have to stop your journey and change your wheel or wait for the roadside assist. You will then learn that most run flats and biscuit wheels are not designed to travel more than 80 KPH and then only for a very limited distance to get you safely home or to a garage. Not at all ideal for a long journey to a remote destination.



Mike's TyreShield is not an emergency or temporal solution! Mike's TyreShield, is designed to prevent unscheduled tyre stops and in most cases you will not even know that your tyre received a puncture at all - Mike's TyreShield, would have sealed the leak already! When you treat your Tyre with Mike's TyreShield, the fluid goes to work by forming a protective coating on the inside of your tyre. This protective coating not only keeps your tyre pressure constant by sealing all the air in that naturally escapes through microscopic pores found in all tyres, it will also seal all puncturing holes on  the tread area up to 6 mm on tubeless tyres. Mike's TyreShield, makes use of road & tyre friction to seal punctures while the vehicle is in motion, in most cases you will not know you even had a puncture as Mike's TyreShield,would of sealed the puncture without you having to remove the puncturing object or stopping your vehicle. This will radically reduce the chance of you ever having to make an emergency or unscheduled stop!



How often do you check your Tyre Pressures?

Mike's TyreShield, goes beyond just punctures, we also help to keep your tyre pressures constant ! When using Mike's TyreShield, the product starts to work for you straight away by forming a protective layer on the inside of your tyre wall sealing the air in. Many people don't realize that air can escape through the microscopic pores of a tyre, this is then compounded by heat and the intense friction caused by contact with the road. Air can even escape from a tyre when your vehicle is not in use. Mike's TyreShield, will not allow any air to escape through the pores in rubber tyres whilst driving. A correctly inflated tyre can save you up to 30% in tyre wear. With Mike's TyreShield, you will be amazed at how little your tyre pressure has changed since your last tyre pressure check, you will then realise how much money you have saved



Technologically superior

At Mike's TyreShield, we have been protecting tyres all over the world for 18 years now, so we have refined Mike's TyreShield, to be the best solution available! We strictly only allow Mike's TyreShield, to be manufactured by accredited ISO Chemists so that our high standards are maintained all over the world. Mike's TyreShield, is not water based to weigh down your performance and therefore it is used by professional race teams. A average car will only need a 100 ML which is a mere 100 g and a racing bicycle between 50g and 75g! Mike's TyreShield, will not dry out or permanently adhere to your tyre. It can easily be removed for retreading and will not damage or affect your rims or tyres in anyway nor will Mike's TyreShield, void your tyre manufactures warranty! Mike's TyreShield, is also compatible with Tyre Monitoring Systems and will not effect the balance or performance of your wheels, from Ferrari's to Tractors! Don't take our word for it, click here to see what professional drivers have to say.



Not just any puncture solution!

Mike's TyreShield, is unlike any other solutions available - Most puncture solutions available are water-based solutions that cannot be used on vehicles that travel more than 80 KPH. Often these solutions are home made and produce a slimy mess when you fit new tyres. Water Based solutions require that you use a large volume of product as they often dry out, most are not compatible with modern Tyre Pressure monitoring systems either. These water based solutions also cause havoc with your wheel balancing and dissolve when coming into contact with more water, not very useful when sealing punctures where your tyre is used in wet conditions! We have been protecting tyres used on heavy duty trucks, mining vehicles and motor racing champions all the way to the every day commuter. We are so confident of our product that we offer a money back guarantee!


Commercial Fleet Owners

Mike's TyreShield, goes beyond just being the best at sealing punctures! For any fleet owner, after fuel, tyre maintenance accounts for the greatest operating expense. The Tyre Maintenance Council research shows that a tyre under-inflation of 1%, reduces tread life by 1.5%. It is quite commonly found that most truck drivers do not know their correct tyre pressures and often operate tyres that are under inflated by 20%. Then of course there is the extra fuel wasted on a tyre that is incorrectly inflated, combined with the over flexing of the sidewall further damaging the tyres and then to make matters worse your tyres are now more prone to blow outs - resulting in costly down time and worse accidents or even road deaths! Alternatively, tyres often get over-inflated which causes the tread area to round in the centre of the tyre and reduces traction, this also causes steering and breaking problems as wells as increased wear on the vehicle's suspension! It has been said that incorrect tyre pressures are to blame for nearly 80% of all tyre failure accidents and 75% of all blowout-accidents! A properly inflated tyre is essential for even wear across the surface of your tyre in order to provide maximum traction and control. With Mike's TyreShield, you will only have to treat your tyres once and periodically check to see how little your pressure has changed, if at all! This will give you the peace of mind that your drivers are safe and that you are now saving money instead of burning it!



Mike’s TyreShield is an innovative concentrated liquid compound easily installed through the tyre valve after the removal of the tyre valve stem. After installation, simply drive the vehicle a few kilometers allowing the tyre rotation to distribute the product evenly throughout the inside of the tyre. Now, all porosity, bead, and rim leaks are sealed for the full legal life of the tyre.

Once a tyre has been treated with Mike’sTyreShields the compound creates a thin liquid film on the inside of the treated tyre which provides a barrier that maintains tyre pressure and creates a complete air tight container within the tyre and tyre rim. Optimum tyre pressure is improved for the full legal life of the tyre, and results in better tyre performance, improved fuel use, and increased safety.

Mike’s TyreShield makes use of road & tyre friction to seal punctures while the vehicle is in motion. In the event of a puncture, the pressurized air inside the tyre trying to escape will immediately draw Mike’s TyreShield to the source of the leak and seal the hole created by the puncture, regardless if the puncturing object is removed or not. The seal is permanent, the tyre does not need to be removed and repaired, and eliminates the need for the driver to make immediate stops to check the tyre. Should a puncturing object be removed while the vehicle is stationary the tyre may lose pressure until the vehicle is in motion. For best results drive/ride the vehicle 2-5 km to ensure the leak is effectively sealed. After installation, Mike’s TyreShield remains dormant inside the tyre until a puncture activated


My Personal Guarantee


My customers are important to me and I am confident of my product therefore, I am happy to provide the following Guarantee

IF 

 for any reason, TYRE SHIELD™ does not give the expected results.   (i.e. another product is already present in the tyre - TYRE SHIELD™ is not compatible with water based products)

OR  

for any reason, you receive a puncture in a tyre treated with TYRE SHIELD™.

I will replace the TYRE SHIELD™ product used in that situation*!

Mike Lovell

*Replacement product will be sent with your next order.